The number (1-38) is that sheet's reference number and the order in which the sheets should be fastened together.
Click the question mark to go to the write up help page.
It will take a while to down load it all.
?
Initial Ideas and Alternatives
1 Introduction
2 Initial Ideas
3 Main alternatives for this project.
Click the question mark to go to the write up help page
?
Analysis and specification
4 Analysis
5 Specification
6 Sequence of operation
7 Parts of the design that will need special thought
Click the question mark to go to the write up help page
?
Research (there are three aspects to this)
Electronics research comprising
9 Resistors
10 Resistor colour code
11 Switches
12 Capacitors
13 Transistors
14 LEDs
15 Input sensors
16 Output devices
17 Integrated circuits
18 Astable circuits
19 Monostable circuits
20 Latch circuits
21 Counter Circuits and displays
22 Decade counter circuits
Materials research comprising of...
23 Plastics
24 Wood
25 Metals
Click the question mark to go to the write up help page
?
How it works and what it will do
Click the question mark to go to the write up help page
?
How I made it
30 Assembly order
31 Circuit boards
Click the question mark to go to the write up help page
?
Testing and changes
Click the question mark to go to the write up help page
?
The finished project
36 Evaluation
37 Health and safety
38 Industrial practices
Click the question mark to go to the write up help page
?
Other notes and details
The sheet titles here are the main core that everybody needs to do.
However as all projects vary somewhat you may need to do some extra sheets to fully explain your work.
One or two of these sheets might not apply to your project.
These titles follow a logical order and also tie in with the marking scheme. This helps the marker to give you the marks that you have earned without missing anything.
Some titles of sheets will need more than one actual sheet and/or a larger A3 sheet.
Many of the sheets have an accompanying help sheet or guidance notes.
Do not throw away any rough drawings or sketches etc as they can be included with section 2, 3 or 7 as appropriate.
Circuit layouts are to be put with section 31 later on.
Dates
The final handing in date will be announced later. This will depend on holiday dates, school events, day of lesson etc etc. It will be around the middle of March.
Pacing
You will need to pace yourself, give yourself targets to get certain bits completed by.
Write up
This can be done on the sheets provided, by hand. Printed on the sheets provided - put them through your own printer. Have typed out bits and pictures pasted on the sheets provided OR you can design your own sheets on your own computer.* Do not spent a vast amount of time on these as there are no marks in producing fancy borders etc. OR any combination of these methods.
* You must stick to the school sheets numbering system.
Now you just need to get steaming along.
Click the hand to go back to the start of the home page
