• 1 arrangement of engine, gearing and differential
  • 2 Crankshaft, rocking shaft & bearings
  • 3 GA side view & plan view
  • 4 Cylinder block & covers
  • 5 Vertical boiler
  • 6 2nd shaft & gear cluster
  • 7 Drivers seat & bunkers
  • 8 Front axle arms & king pins
  • 9 Pipes from tank to pump & boiler clacks
  • 10 Oil pump & force feed lubrication
  • 11 Pistons, rods, crossheads, con rods, big ends & slide bars
  • 12 Boiler feed pump

Little Samson Models

3" Scale Model Drawings

These drawings are now very near to completion. The set is at least 98% complete. At present there are some 55 A3 sheets, all in CAD format, with some of the arrangement drawings in colour. The remainder are still in A4 format but are being stealily moved across into the A3 set.

At present the cost is £60 plus £5 postage which buys 55 presentation A3 sheets and a further selection on A4 sheets. All in CAD. If you wish to make a purchase now the remaining A3 sheets will be forwarded when complete, FOC except postage.

When complete the total cost is likely to be £75. These are excellent drawings, please send A4 SAE for sample drawings (A3 sheets folded).

 

Copies of Universal Carrier works drawings

It is important to appreciate that the works drawings listed below are copies of drawings which were made shortly after the turn of the century. Customers might prefer to buy one only to gauge the print quality first. Most sheets are 36" by 28". Postage extra at cost.

1 sheet £3.50, up to 5 sheets £3.25 each, over 5 sheets £3.00 each.

There are a further 9 drawing, all general arrangements, which are readable but of poor quality. These include tipping wagons.

back to home page